This can happen if there is still built up pressure inside the tank. 1. Gently pull up the pressure release valve to allow the release of any residual pressure in the tank. 2. Push firmly down on the pump handle and screw open in a clock-wise ...
If your pump becomes harder to move up and down or stops being able to be pumped, please unscrew the pump handle (pictured below) and take the inner pump handle out. At the bottom of the pump handle locate the 4cm O-ring (arrow pointing to it on ...
It sounds like you may be trying to fill up the actual pump handle itself. 1. Please try to remove as much water as you can by just turn it upside down and giving it a shake 2. Replace the cylinder into the fitting and tighten up the handle again ...